Smart LED Street Lighting Retrofit in Naji Town, Arongqi

CPS Lighting delivers LED road-lighting solutions and retrofit support for municipal projects. In Naji Town, Arongqi, Hulunbuir, Inner Mongolia, China, CPS won the contract for a smart street-lighting upgrade covering 2,033 luminaires across 37 roads, alongside repairs to poles, cables and control infrastructure.

The project replaced high-pressure sodium lighting with LEDs and introduced remote centralised control and individual-light management. Its scope also included new lighting on a connecting road, at Wangjie Square and around Xiangyang Bridge, addressing both ageing equipment and areas needing additional lighting.

Naji Town road lighting at night
Town road lighting at night
37 roads
Town street-lighting upgrade
2,033
Luminaires in the upgrade scope
11,220 m
Ageing or faulty cable repaired

1. A retrofit extending beyond lamp replacement

The existing network had ageing lighting assets, safety concerns, high energy consumption and some unlit areas. Replacing the light source addressed only part of the brief: the supporting electrical and structural infrastructure also needed attention so the renewed installation could be operated and maintained.

Work itemPublished project scope
Lighting upgrade2,033 luminaires across 37 roads
Pole repairs348 damaged poles
Cable repairs11,220 m of ageing or faulty cable
Control infrastructureRepair work and central-controller additions across 31 control cabinets
Delivery modelEnergy management contracting (EMC)
Project periodsSix-month construction period; 7.5-year operation and maintenance period

The published programme used energy management contracting (EMC), combining the upgrade with a stated operation and maintenance period. These are project-specific periods; they do not establish a standard delivery time or product warranty for new orders.

Roadside lighting pole in Naji Town
Roadside lighting by day
Roadside infrastructure works
Infrastructure works beside local homes

2. New lighting for connections, public space and the bridge

The installation also included several separately described additions. Their different settings called for different power ratings and pole arrangements. The original account does not clarify whether all additions are included in the 2,033-light upgrade total, so they are listed separately without creating a combined fixture count.

Location or applicationReported new installation
Link between the former and new National Highway 111 routes100 smart LED street lights, 200 W each
Wangjie SquareSix decorative lighting sets, 60 W each
Xiangyang BridgeFour smart LED street lights, 150 W each
Bridgehead lighting20 poles at 15 m, carrying 80 smart decorative street lights rated 200 W each

A through-road, bridge approach and public square have different lighting tasks. For a similar scheme, road width, crossings, junctions, existing pole positions and adjacent properties should guide the optical layout. The 15 m mounting height belongs to the bridgehead installation; it should not be applied to every pole in the project.

3. Remote management and a reported energy result

CPS’s work combined LED replacement with a smart lighting control system supporting remote centralised control and individual-light energy management. Pole and cable repairs were part of the wider project scope, connecting the luminaire upgrade to the condition of the existing network.

The original project account reports overall energy savings of more than 60% after the retrofit. It does not publish the baseline equipment schedule, operating hours, metering records or calculation method. The figure is therefore a reported project outcome, rather than an independently verified saving or a forecast for another town.

Street-light installation work
Street-light work from an elevated platform
Street lighting along an open route
Lighting along an open route

For a new retrofit, agree the control functions, communications method, operating scenes and handover records before procurement. Check lighting performance at the intended dimmed settings as well as full output, and establish how energy use will be compared with the previous installation.

CPS’s manufacturing resources and laboratory equipment support new equipment reviews. Request model-specific photometry, electrical and environmental test documentation, together with the proposed driver and controller configuration.

4. Historical installation and a current product reference

The case identifies smart LED road lights and decorative lighting but does not name the historical luminaire series. The current LD6A is a road-lighting option for new enquiries, not a confirmed product from the Naji Town installation. Decorative poles, square lighting and the control system require their own specifications.

LD6A current catalogue reference
Current street-light catalogue reference

LD6A LED street light — current selection reference

ParameterProject configuration or catalogue reference
Historical project equipmentSmart LED street lights and decorative lighting; exact series not published
Current catalogue power range50–350 W
Current input voltageAC 100–277 V
Current optical reference150° × 75° road distribution
Current colour-temperature options3000 / 4000 / 5000 / 5700 K
Controls and selection boundaryConfirm the proposed driver and control interface; catalogue options do not establish the historical installation.

View product details

5. Plan your municipal lighting retrofit

Send a road plan or CAD drawing, an asset schedule, existing fixture powers and operating hours, pole heights and positions, and photographs of roads and control cabinets. Include known cable or pole defects, the project location, required lighting criteria and intended control functions.

Request a free DIALux simulation to review the proposed layout using matching photometric files. For an energy-performance brief, also supply the existing energy records and measurement boundary. Agree design inputs, site checks, maintenance responsibilities and the energy-comparison method before implementation.